ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing

ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing

Product Details:

Place of Origin: China
Brand Name: LIB INDUSTRY
Certification: CE,RoHS,ISO17025
Model Number: S-250

Payment & Shipping Terms:

Minimum Order Quantity: 1 Set
Packaging Details: Wooden cases standard export package
Delivery Time: 5-14 days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram,paypal
Supply Ability: 360 sets / quarter
Get Best Price Contact Now

Detail Information

Product Name: Salt Spray Corrosion Chamber Internal Dimensions: 640*1000*500 (mm)
Temperature: Ambient ~60℃ Usage: Laboratory, University, Research Center
Warranty: 36 Months Standard: ASTM B-117; ISO9227
High Light:

Climate Salt Spray Corrosion Chamber

,

Industrial Salt Spray Corrosion Chamber

,

Protective Coatings Testing Salt Mist Chamber

Product Description

ISO 9227 Climate Salt Spray Corrosion Chamber

Description 


ISO 9227 Climate Salt Spray Corrosion Chamber,After the alternating salt spray test, the relative corrosion rate, structure, morphology and outdoor corrosion results of the samples are very similar.

 

This test can effectively evaluate many corrosion mechanisms, such as general corrosion, electrochemical corrosion and crevice corrosion, etc. Salt corrosion chamber is especially suitable for Corrosion testing of industrial protective coatings.

 

Products Parameters 

 

Name

ISO 9227 Climate Salt Spray Corrosion Chamber

Model S-250
Internal dimensions  640*1000*500(mm)
Overall dimensions  810*1800*1180(mm)
Temperature range Ambient ~60℃
Humidity range 95% ~ 98% RH
Temperature fluctuations +/- 0.5 ℃
Temperature deviation: +/- 2.0 ℃
Test time 1~999 hours, settable
Spray deposition 1~2ml / 80cm2 · h
Spray type Continuous / Periodic
Temperature Controller LED display, P.I.D+S.S.R. microcomputer integrated controller
Temperature sensor PT100Ω / MV A-class
Salt fog collected Fog collector and fog measure cylinder
salt water filtration Salt water filter near the suction tubes( Avoid the nozzle blockage)
Salt water preheating Saturated air barrel
Spraying system Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution)
Interior /Exterior material Glass fiber reinforced plastics
Standard configuration Sample bracket / sample holder / spray nozzle / Fog collectors / measure cylinder
safety device over-temperature protection, water shortage protection, over current protection, earth leakage protection
Sealing Hydrostatic hood seal
Standard ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227
Power Supply 220V 50HZ

 

 
Design and Construction 
ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing 0
Test Area Observation Window

 

Salt Test


This test can effectively evaluate many corrosion mechanisms, such as general corrosion, electrochemical corrosion and crevice corrosion, etc. Salt corrosion chamber is especially suitable for Corrosion testing of industrial protective coatings.

 

●Salt fog conditions: Salt fog conditions can be understood as ordinary neutral salt fog, which can spray 5% foggy sodium chloride solution through the nozzle.(Salt Spray chamber)

 

●Drying conditions: Drying conditions require sufficient air circulation in the test space, not only to control the drying temperature, but also to avoid the interference of additional corrosive gases and liquids.

 

●Humid conditions (constant temperature and humidity): Humid conditions need to provide specific temperature and humidity for the test space. The temperature range is generally between 35°C and 70°C, and the relative humidity range is generally between 95% and 100%.

 

●Spraying conditions: Spray the test solution (such as 5% sodium chloride solution) on the tested sample through the pressurized system and nozzle.(Salt corrosion test chamber)

 

●Standing conditions: Placed at room temperature, the sample usually undergoes a slow drying process without corrosive vapors and gases, almost no gas flow, and the temperature is usually 25±5'C. The relative humidity is 50% or lower.

 

ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing 1 ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing 2

 

Want to Know more details about this product
I am interested in ISO 9227 Climate Salt Spray Corrosion Chamber For Industrial Protective Coatings Testing could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.