The Structure Principle and Characteristics of the Salt Spray Test Chamber
September 18, 2021
The salt spray test chamber is mainly composed of spray tower, test tank, test piece placement, salt spray sedimentation detection device, drain device, sewage device, automatic salt water replenishment level filter, electronic control system and other parts. The whole of the equipment is made of glass steel plate.
salt spray test chamber has the characteristics of good corrosion resistance and durability, and the cover is made of transparent plexiglass plate, which is transparent and clear to view the physical and chemical conditions.
A spray tower made of plexiglass is placed in the studio. The tower is equipped with a crystal-free glass nozzle that is easy to disassemble and assemble. This nozzle has the advantages of no deformation, no crystallization and stable spray volume for long-term use, and the spray volume and flow rate are all You can adjust
The pressurized air generated by the air compressor is filtered by the filter tank and then passes through the pressure regulating valve to reach the saturator. Then the street nozzle at the initial port of the saturator produces a moderately high but suitable temperature, and at the same time sucks the salt water in the spray tower. Come up to achieve the spray effect.
The purpose of the air compressor is to make the water form a mist, and the role of the saturator is to prevent the salt water from crystallizing.