IEC60529 IP5X IP6X Dust Resistance Test Chamber

September 3, 2021

Latest company news about IEC60529 IP5X IP6X Dust Resistance Test Chamber

Dust resistance test chamber provides corresponding environmental simulation and accelerated test tests for scientific research, product development and quality testing, used to assess and determine the enclosure and sealing of electrical and electronic products and the protection (IP) of electrical equipment enclosures and identification, as well as in dust-proof testing Can the good working performance of equipment and components be guaranteed later or during the test.

 

Performance


Dust concentration: dry talcum powder 2~4Kg/m3

Dust particles: 1~10um (the particle size is less than or equal to 5um, accounting for more than 50%)

Test temperature: RT+10℃~80℃

Air velocity: but 2m/s

Screen spacing: 75μm

Test dust: dry talcum powder, Portland cement, chimney ash, etc.;

 

The dust-proof level of IP5X and IP6X has the highest requirements for testing. Therefore, the dust particles used are the smallest particles to simulate sandstorms and perform intrusion tests on the test objects. If the test objects do not enter the interior after testing, Then it shows that it has passed the IP5X or IP6X dustproof test. The structure principle of the dust test chamber that can carry out IP5X and IP6X dust test is to recycle the dust to test the samples

 

  latest company news about IEC60529 IP5X IP6X Dust Resistance Test Chamber  0          latest company news about IEC60529 IP5X IP6X Dust Resistance Test Chamber  1