Air Cool Type Thermal Cycling Chamber 380V 50HZ Thermal Shock Test Chamber
|Place of Origin:||China|
|Certification:||CE RoHS ISO17025|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden cases standard export package|
|Delivery Time:||10 days ( check if have stock)|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||360 sets / quarter|
|Pre-high Temp.:||+220℃||Volume:||160L, 210L, 500L, 1000L And More|
|Power Supply:||380v, 50Hz||Cooling Mode:||Air-cool Type|
|Noise:||Less Than 65db||Temperature Range:||-70C To 150C|
thermal testing equipment,
thermal cycling machine
Highly Accelerated temperature Shock Temperature Cycling Thermal Shock Tester
Highly Acceleratedtemperature Shock Temperature Cycling Thermal Shock Tester with single or multiple chambers may be used to perform thermal shock testing. When using single chamber thermal shock equipment, the products or samples remain in one chamber and the chamber air temperature is rapidly cooled and heated. This usually results in a slower rate of change in the product response temperature as the entire chamber must be cooled down and heated up. However larger products can be tested in single compartment chambers. Some equipment uses separate hot and cold chambers with an elevator mechanism that transports the products between two or more chambers. This results in a more rapid rate of change in the air temperature.
Highly Acceleratedtemperature Shock Temperature Cycling Thermal Shock Tester ,Thermal shock testing also called temperature shock testing or temperature cycling exposes products to alternating low and high air temperatures to accelerate failures caused by repeated temperature variations during normal use conditions. The transition between temperature extremes occurs very rapidly during thermal shock testing, greater than 15 °C per minute. hermal shock testing also called temperature shock testing or temperature cycling exposes products to alternating low and high air temperatures to accelerate failures caused by repeated temperature variations during normal use conditions. The transition between temperature extremes occurs very rapidly during thermal shock testing, greater than 15 °C per minute. Alternatively, temperature cycle testing uses slower rates of change between high and low temperatures.
|Name||Highly Acceleratedtemperature Shock Temperature Cycling Thermal Shock Tester|
|Inner dimensions of test room (mm)||450*450*360|
|Volume of test room (mm)||72L|
|Load of test room||30kg|
|Upper limit preheat temperature||+220℃|
|Heating time||Ambient temperature to ~ + 200℃, within in 30 minutes.|
|Lower limit pre-cool temperature||-75℃|
|Cooling time||Ambient temperature to ~ -70℃, within in 30 minutes|
|Test room||High temperature exposure range||Ambient temperature +20 to +200°C|
|Low temperature exposure range||–65 to -5°C|
|Recovery time||Within 15 minutes|
|Temperature deviation||≤±3 ℃|
|Controller||Programmable color LCD touch screen controller|
|Cooling system||Mechanical compression refrigeration system|
|Refrigerating unit||French TECUMSEH compressor|
|Air circulation||Centrifugal wind fan|
|Exterior material||Steel Plate with protective coating|
|Interior material||SUS304 stainless steel|
|Power Supply||380V 50HZ|
|Environmental conditional||5℃～+40 ℃ ≤85% R|
Test area is made of stainless-steel.
Basket displacement time less than 15 seconds
Temperature resetting time less than 15 minutes
2 pieces of adjustable and removable shelves
Test hole, sealed with silicone screw plug
Programmable color display touch screen controller.
Programs reach to 999 groups and 999 sections
RS-232 /RS-485 interface, PC Link, LAN network
Double layer insulating glass 8cm thick, made of tempered glass.
The conductive film is located on the interior glass to prevent window frosting, built-in LED light for the work room lighting, can clearly observe samples.
The light control button is located below the controller.
- Export Standard Wooden Box
- Can be used for Sea, Air, Railway, Truck transportation
- Package size: 4.9 m³, gross weight: 430kg
- Provide test solution
If you are end user, you have some test samples need environmental testing, you are not clear the tests, please contact us to get test solution. Will response
within 10 hours after got your requests.
If you are trading dealer, you got request from your customers, please let us know, our team will response you to send test solution for you.
If you want to participate in bidding, our company will send you full brochure with best price for you win the tender.
- Send specification and quotation
If you are interested in some models, you want to get specifications and quote, don’t hesitate to contact our elite team to get brochure and best price.
Will offer you one-stop service including machine, transportation, and installation, calibration, and spare parts…etc
- To be our agent
We welcome you to be our agent in countries to promote LIB test chambers to get win-win.Agent price, service
will support for you.
- Warranty & After Sales Service
3 Years Warranty, Lifelong Follow-up Services. We have a professional after-sales team, if you have any questions during operation, we will supply solutions to you with 24 hours.